Technical parameters: Model MF500 Series Main motor power (KW): 37KW wind turbine power (KW): 5.5KW vibration sieve power (KW): the 0.75KW feeder power (KW): the 0.75KW production (KG / H): 200 - 400KG / H Dimensions (MM): 1900 * 1700 * 3900 Weight (KG): 2200 performance characteristics, disc design, high yield, strong wear resistance, life is twice that of the ordinary disc; 2, using the newly designed bearings to achieve high speed, while using only one drive motor, to ensure the efficient impact grinding, which greatly saves mechanical operating time and control engineering; 3, reasonable design, the smaller grinding chamber cross-section, the disc is almost flat upright, material enters immediately caught firmly, finely ground, and then quickly shifted This eliminates the surge material in the grinding chamber, to avoid the decomposition temperature materials, and thus have higher yields; 4, the touch screen The machine running status, adjustment of parameters and fault information, and can start the on / off the device; 5, feeder according to the main motor load automatically increase or decrease the volume of feed; 6, easy installation and maintenance, open the door to clean up; milling process sealed, no dust leakage; 7, fully automated, automatic feeding, discharging; 8, the disc knife and fixed knife gap, using the specific adjustment (three minutes), a new simple, easy to control the size of the powder; host cooling system using wind, water combined cooling; 10,10-120 mesh adjustable grinding gap adjustment is simple, just use a feeler gauge and adjust the bolt can be precisely adjusted; Huibang brand mill for milling PVC , PE, ABS, PPS magnetic card, EVA, LDPE, LLDPE, HDPE, PP, PS, EPS, PC, rubber, foam, leather and so on.